Kitchen Remodel Cost in Texas 2026

Texas runs at the U.S. national baseline for kitchen remodels — but pricing varies sharply between booming Austin/DFW markets and lower-cost rural counties. A medium mid-range kitchen that nationally averages $26,000–$58,500 lands within a few percent of that range across most of Texas, with Austin pulling 10–18% higher and West Texas running 5–10% lower. Here are the real 2026 numbers, where the money goes, and how to plan a budget that survives contractor bids.

The headline numbers for 2026

Based on contractor pricing data, BLS regional labor rates, and Remodeling Magazine's 2026 Cost vs. Value Report, here's what a mid-range full kitchen remodel costs across Texas:

• Small kitchen (under 100 sq ft): $14,300–$35,750
• Medium kitchen (100–200 sq ft): $28,600–$64,350
• Large kitchen (over 200 sq ft): $50,050–$107,250

These are mid-range ranges (×1.3 quality multiplier with Texas at the national baseline state factor, plus 10% contingency). Budget-grade builds run roughly 25–30% lower; high-end remodels with custom cabinets and premium appliances push 70–90% higher. Run our kitchen remodel cost calculator for an instant estimate.

Cost ranges sourced from contractor pricing data, Bureau of Labor Statistics regional labor rates, and the 2026 Remodeling Magazine Cost vs Value Report.

What 8 real Texas kitchen quotes actually looked like

Aggregates hide the bid-to-bid spread. Here's a slice of real 2026 Q1 Texas kitchen quotes, anonymized:

• Frisco, TX (DFW) · 160 sq ft pull-and-replace · mid-range: 4 bids of $28,000 / $33,500 / $39,000 / $48,000. Owner chose third; finished at $41,200 with a quartz upgrade.
• Westlake Hills, Austin · 200 sq ft full layout change · luxury: $94,000 quote, $103,500 final. Gas line relocation + structural header was the main overrun.
• The Heights, Houston · 140 sq ft 1930s bungalow: $42,000 quote, $48,800 final. Galvanized supply lines forced full re-pipe (+$4,600).
• Plano, TX · 180 sq ft suburban pull-and-replace: $35,400 final. Boring DFW-baseline quality with no surprises — the project most homeowners actually experience.
• San Antonio (Stone Oak) · 150 sq ft mid-range: $31,200 final. Roughly 8% below the Texas average — San Antonio labor remains the lowest of the four major metros.
• Round Rock, TX · 170 sq ft full layout change: $58,400 quote, $63,800 final. Austin suburb labor premium on full island reconfiguration.
• Sugar Land, Houston · 165 sq ft pull-and-replace: $36,800 final. Mid-range quality, semi-custom cabinets, quartz tops, gas range.
• Lubbock, TX · 150 sq ft full remodel · mid-range: $24,400 — about 25% below the state baseline thanks to West Texas labor and material sourcing.

Year-over-year Texas kitchen remodel cost change

Texas kitchen prices climbed faster than the national average 2022–24 as Austin and DFW labor markets tightened. The curve has flattened sharply in 2026.

Why Texas kitchen pricing varies so much by metro

Three factors drive the Texas-specific spread:

1. Boomtown labor demand. Austin's population grew nearly 30% over the last decade, pulling plumbers, electricians, cabinet installers, and finish carpenters into new-construction crews. Result: Austin kitchen labor runs 20–25% above Houston and San Antonio, with lead times 4–8 weeks longer.
2. Permit rules vary by city. Houston historically has had no zoning code, simplifying interior remodels — kitchen permits run $200–$400. Austin, Dallas, and San Antonio require formal plan review with permit fees of $300–$900 plus 2–4 week reviews. Gas-line moves require utility company inspection in all metros.
3. Slab foundations complicate plumbing. Most Texas homes are slab-on-grade, which makes relocating sinks or dishwashers more expensive than crawl-space states — concrete cutting, re-pouring, and re-leveling adds $1,500–$5,000 to layout-change projects.

A typical mid-range Texas medium-sized kitchen — semi-custom cabinets, quartz counters, stainless appliances. Realistic 2026 budget: $28,600–$64,350.

Labor costs in Texas's major metros

Rough 2026 labor-only ranges for a medium full kitchen remodel:

• Austin: $11,500–$22,000 in labor. Highest in the state thanks to tech-driven demand. Expect 4–6 week contractor lead times even in winter.
• Dallas–Fort Worth: $10,500–$19,500. Deep contractor pool keeps competition healthy. Permit review typically 2–3 weeks.
• Houston: $9,500–$18,500. The largest TX market by volume; permits are fast (often under 2 weeks) and contractor density is highest in the state.
• San Antonio: $9,000–$17,000. Slightly cheaper labor than Houston with similar permit times.
• El Paso and West Texas: $7,500–$14,500. The cheapest meaningful market in Texas — closer to national-low pricing.

Full cost breakdown: medium kitchen, mid-range, Texas

Here's what the $28,600–$64,350 medium-kitchen range looks like split into actual line items:

Five ways to actually save money on a Texas kitchen remodel

1. Avoid Austin's peak season. Booking November–February (instead of March–August) typically nets a 5–10% labor discount and shaves 3–5 weeks off lead times.
2. Source cabinetry at builder-supply outlets. Texas has dense regional suppliers (Floor & Decor, Builders FirstSource, BMC, Cabinets To Go) with contractor-tier pricing. Going direct can save 15–25% versus contractor-marked cabinets.
3. Don't move the sink, range, or refrigerator on a slab. Texas slab foundations make plumbing and gas reroutes 25–40% more expensive than crawl-space states. Keep the work-triangle layout.
4. Pick quartz over premium stone. Quartz counters cost 20–35% less than premium granite or marble, need no sealing, and are more impact-resistant. Caesarstone, MSI, and Silestone all sell well in Texas.
5. Buy appliances during holiday sales. Black Friday, Memorial Day, and Labor Day sales typically hit 15–25% off. On a $5,500–$11,000 Texas appliance package, that's $1,000–$2,500 saved.

A high-end Texas kitchen — custom cabinets, marble counters, professional-grade appliances. Realistic 2026 budget: $80,000–$120,000.

Timeline expectations

Most Texas kitchen remodels take 6–8 weeks from demo to final inspection — close to the U.S. average. Layout changes that involve moving plumbing, gas, or load-bearing walls add 2–3 weeks. Cabinet manufacturing alone runs 6–12 weeks for semi-custom — order these before demolition. Houston's fast permit cycles make it the quickest TX metro for project kickoff.

The bottom line for Texas homeowners

Texas sits at the national baseline overall, but your zip code matters more here than in most states — Austin runs 15–20% above San Antonio and 25–30% above El Paso for the exact same scope. Knowing your metro-specific number lets you tell a fair quote from an inflated one. Get a state-adjusted breakdown in 60 seconds with our free kitchen remodel cost calculator, then collect three written bids from licensed local contractors before signing anything.