Florida · Pool · Free 2026 permit-fee estimator
Pool permit cost in Florida
On a typical $55,000 pool project, Florida's statewide median building permit fee is $1,001 — about 1.82% of cost. Top Miami metros run higher.
Your project cost
Leave blank to use the typical pool value, or enter your quote to refresh all metro fees below.
Florida statewide median
$1,001
≈ 1.82% of $55,000 project cost
Range: $100 (min) – $2,400 (max)
Top 3 Florida metros — actual permit fee
The state base × project type stays the same; the metro multiplier is where the swing comes from.
Miami
$1,351
Metro multiplier: 1.35× statewide base
Orlando
$1,101
Metro multiplier: 1.1× statewide base
Jacksonville
$1,001
Metro multiplier: 1× statewide base
Florida permit-fee context
DBPR surcharge: 1.5% of permit fee, $4 min — applies statewide. Hurricane zones (Miami-Dade, Broward, Monroe) require HVHZ-rated inspections at extra fee.
Why pool? Pool + electrical + plumbing + barrier/fence permits. Coastal/freeze zones add geotechnical review. High fee weight.
What this fee does NOT include
- Plan-review service fees (typically 0.5–1% of cost, separate line)
- Per-trade fees (plumbing, electrical, mechanical — $50–$200 each)
- State-level surcharges (FL DBPR, NJ DCA, OR BCD, etc.)
- Contractor's filing/processing fee
Rule of thumb: budget 1.5–2× the base permit fee for the all-in cost.
Compare pool installation in Florida across all lenses
4 sister tools · same project, same stateBefore you sign, run the 4 other state-aware lenses for the same project.
FAQ — Pool permits in Florida
How much is a pool permit in Florida in 2026?
On a typical $55,000 pool project in Florida, the statewide median permit fee runs $1,001 — about 1.82% of project cost. Major metros run higher: Miami $1,351, Orlando $1,101, Jacksonville $1,001. DBPR surcharge: 1.5% of permit fee, $4 min — applies statewide. Hurricane zones (Miami-Dade, Broward, Monroe) require HVHZ-rated inspections at extra fee.
Why is the fee higher in major Florida metros?
Each Florida city/county sets its own multiplier on top of the state base rate. Miami runs 1.35× because of stricter plan review + structural review + energy-code overhead. Jacksonville sits lower (1×) because of less plan-review depth + simpler intake. Rural counties in Florida often have flat-fee schedules below even the lowest metro.
What's included in the permit fee vs. what's billed separately?
The permit fee covers the building department's intake + base review. NOT included: plan-review service fees (often a separate line, 0.5–1% of project cost), per-trade fees for plumbing/electrical/mechanical (typically $50–$200 each), and any state-level surcharges (FL adds DBPR 1.5%, NJ adds DCA, OR adds 12% BCD surcharge). Your contractor's filing fee is also separate. Budget 1.5–2× the base permit fee for the all-in cost.
Can I skip the permit and save the fee?
Don't. Working without a required permit fails any future resale inspection (the buyer's inspector WILL flag it), voids your homeowner's insurance for any related claim, and triggers retro-permitting fines that are typically 2–3× the original fee. Florida treats unpermitted pool work as a separate violation under state building code. The "savings" become a $1,500 problem at resale on a $500 fee.
Other projects in Florida
Disclaimer: Permit fees are jurisdiction-specific and change frequently. These values are 2026 medians — verify against your local building department's current fee schedule before budgeting.