How much does a deck project cost in Wyoming?

Wyoming is at the national base for renovation pricing. A typical mid-range deck project of medium size in Wyoming runs about $7,865–$15,730, including labor, materials, permits, and a 10% contingency.

Are deck costs higher in Wyoming than the national average?

Wyoming sits at the national baseline. Costs are close to the U.S. average, though urban metros may run 5–10% higher than rural counties within the state.

Do I need a permit for a deck project in Wyoming?

Most Wyoming municipalities require a permit for any work involving plumbing, electrical, structural changes, or roof tear-offs. Cosmetic-only updates (paint, fixtures, hardware) typically don't need one. Contact your local building department to confirm — fees usually run $150–$600 in Wyoming.

How long does a deck project take in Wyoming?

Most decks are built in 1–3 weeks once permits are pulled. Wyoming permit-review timelines and contractor availability can add 1–2 weeks during peak season (spring and early summer). Booking in late fall or winter often shortens the schedule.

← Deck cost calculatorWyoming: At national base

Wyoming cost guide

Deck Construction cost in Wyoming

Wyoming runs slightly below national — but Jackson Hole pulls the state average up sharply. Below are 2026 deck cost ranges adjusted for Wyoming, plus a state-specific estimator and FAQ.

Get a personalized Wyoming estimate

Wyoming renovation cost vs. the U.S. average

Wyoming tracks the national baseline. Here's what does and doesn't drive cost in Wyoming, and how it compares to neighboring states.

Read the Wyoming cost-driver breakdown

Deck cost in Wyoming vs. the U.S. average (2026)

Mid-range total cost (small / medium / large project sizes), state-adjusted vs. national baseline.

Small

≈ U.S. avg

Under 200 sq ft

$3,575–$7,150

U.S. avg: $3,575–$7,150

Medium

≈ U.S. avg

200–400 sq ft

$7,865–$15,730

U.S. avg: $7,865–$15,730

Large

≈ U.S. avg

Over 400 sq ft

$15,730–$31,460

U.S. avg: $15,730–$31,460

Cost ranges in Wyoming

Total project ranges (low–high) by size and quality tier. Includes labor, materials, permits, and 10% contingency.

Size	Budget	Mid-range	High-end
Small Under 200 sq ft	$2,750 – $5,500	$3,575 – $7,150	$6,050 – $12,100
Medium 200–400 sq ft	$6,050 – $12,100	$7,865 – $15,730	$13,310 – $26,620
Large Over 400 sq ft	$12,100 – $24,200	$15,730 – $31,460	$26,620 – $53,240

Ranges scope: Pressure-treated lumber. For other scopes (fixtures, layout changes, etc.) use the full deck calculator.

All ranges are built from publicly available contractor data and industry benchmarks, then adjusted for Wyoming using labor and material indices. Updated twice yearly. Always get 3+ written bids before committing.

What drives deck pricing in Wyoming

The three structural factors that make Wyoming track close to the national average for renovation projects in 2026.

Jackson Hole resort premium

Jackson trade labor runs $80–$120/hr — resort-town housing scarcity for tradespeople keeps rates 40–60% above the rest of Wyoming.

Rural Wyoming low baseline

Cheyenne, Casper, and rural Wyoming run $40–$58/hr — among the lowest rates in the Mountain West.

Cold-climate code requirements

WY code requires R-49 ceiling insulation and high-efficiency HVAC. Short construction season compounds demand pricing.

Full Wyoming cost-driver breakdown

Wyoming vs. neighboring states (deck cost)

Relative cost-index versus each bordering state. Useful if you're sourcing materials, vetting cross-border contractors, or weighing where to take on the project.

Colorado

Colorado +16%

View deck cost in Colorado →

South Dakota

Wyoming +14%

View deck cost in South Dakota →

Nebraska

Wyoming +11%

View deck cost in Nebraska →

Compare all 11 project types across Wyoming metrosSide-by-side 2026 pricing for kitchen, bathroom, roofing, solar, windows, and 6 more.Open metro hub