How much does a deck project cost in Mississippi?

Mississippi is at the national base for renovation pricing. A typical mid-range deck project of medium size in Mississippi runs about $7,865–$15,730, including labor, materials, permits, and a 10% contingency.

Are deck costs higher in Mississippi than the national average?

Mississippi sits at the national baseline. Costs are close to the U.S. average, though urban metros may run 5–10% higher than rural counties within the state.

Do I need a permit for a deck project in Mississippi?

Most Mississippi municipalities require a permit for any work involving plumbing, electrical, structural changes, or roof tear-offs. Cosmetic-only updates (paint, fixtures, hardware) typically don't need one. Contact your local building department to confirm — fees usually run $150–$600 in Mississippi.

How long does a deck project take in Mississippi?

Most decks are built in 1–3 weeks once permits are pulled. Mississippi permit-review timelines and contractor availability can add 1–2 weeks during peak season (spring and early summer). Booking in late fall or winter often shortens the schedule.

← Deck cost calculatorMississippi: At national base

Mississippi cost guide

Deck Construction cost in Mississippi

Mississippi runs ~16% below national — one of the cheapest states for renovations. Below are 2026 deck cost ranges adjusted for Mississippi, plus a state-specific estimator and FAQ.

Get a personalized Mississippi estimate

Why is Mississippi 16% cheaper than the U.S. average?

Mississippi renovation costs run about 16% below national. Here's the structural reason — lower trade-labor rates, simpler permitting, and minimal code overlays.

Read the Mississippi cost-driver breakdown

Deck cost in Mississippi vs. the U.S. average (2026)

Mid-range total cost (small / medium / large project sizes), state-adjusted vs. national baseline.

Small

≈ U.S. avg

Under 200 sq ft

$3,575–$7,150

U.S. avg: $3,575–$7,150

Medium

≈ U.S. avg

200–400 sq ft

$7,865–$15,730

U.S. avg: $7,865–$15,730

Large

≈ U.S. avg

Over 400 sq ft

$15,730–$31,460

U.S. avg: $15,730–$31,460

Cost ranges in Mississippi

Total project ranges (low–high) by size and quality tier. Includes labor, materials, permits, and 10% contingency.

Size	Budget	Mid-range	High-end
Small Under 200 sq ft	$2,750 – $5,500	$3,575 – $7,150	$6,050 – $12,100
Medium 200–400 sq ft	$6,050 – $12,100	$7,865 – $15,730	$13,310 – $26,620
Large Over 400 sq ft	$12,100 – $24,200	$15,730 – $31,460	$26,620 – $53,240

Ranges scope: Pressure-treated lumber. For other scopes (fixtures, layout changes, etc.) use the full deck calculator.

All ranges are built from publicly available contractor data and industry benchmarks, then adjusted for Mississippi using labor and material indices. Updated twice yearly. Always get 3+ written bids before committing.

What drives deck pricing in Mississippi

The three structural factors that make Mississippi cheaper than the national average for renovation projects in 2026.

Low trade labor rates

Mississippi trade labor rates run $30–$50/hr — among the lowest in the U.S. Jackson, Biloxi, and Tupelo are the highest-cost metros.

Simple permit structure

Most Mississippi municipalities keep permits at $100–$275. Code amendments are limited; review cycles are fast.

Coastal storm code on Gulf coast only

Hancock, Harrison, and Jackson counties require wind-rated fastening on roofs, but otherwise statewide pricing stays close to the low baseline.

Full Mississippi cost-driver breakdown

Mississippi vs. neighboring states (deck cost)

Relative cost-index versus each bordering state. Useful if you're sourcing materials, vetting cross-border contractors, or weighing where to take on the project.

Tennessee

Tennessee +10%

View deck cost in Tennessee →

Louisiana

Louisiana +9%

View deck cost in Louisiana →

Alabama

~ same

View deck cost in Alabama →

Compare all 11 project types across Mississippi metrosSide-by-side 2026 pricing for kitchen, bathroom, roofing, solar, windows, and 6 more.Open metro hub